http://www.documentbays.org/89960-bs-en-10028-2-2017.html

8.2 Delivery condition8.2.1 Unless otherwise agreed at the time of enquiry and order, the products covered by thisdocument shall be supplied in the usual conditions given in Table 3 (see 8.2.3).8.2.2 Normalizing may, at the discretion of manufacturer, be replaced with normalizing rolling for thesteel grades P235GH, P265GH, P295GH, P355GH and 16Mo3. In this case, additional tests in thesimulated normalized condition with an agreed frequency of testing may be agreed at the time ofenquiry and order to verify that the specified properties are complied with.8.2.3 If so agreed at the time of enquiry and order, products made of steel grades P235GH, P265GH,P295GH, P355GH and 16Mo3 may also be delivered in the untreated condition. Products made of one ofthe other alloy grades may be supplied in the tempered or normalized condition or, in exceptionalcases, in the untreated condition if so agreed (Annex A contains heat treatment information for thepurchaser).In these cases, testing shall be carried out on test pieces in the usual delivery condition as indicated inTable 3.8.2.4 Information on welding are given in Annex B of this standard.8.3 Chemical composition8.3.1 The requirements of Table 1 shall apply for the chemical composition according to the castanalysis.8.3.2 The product analysis shall not deviate from the specified values for the cast analysis as specifiedin Table 1 by more than the values given in Table 2.