ASHRAE 110-1995

The purpose of this standard is to specify a quantitative and qualitative test method for evaluating the fume containment of a laboratory fume hood.

Units: Dual

Product Code(s): 86336,D-86336

This product references:ANSI/ASHRAE 111-2008 - Testing, Adjusting, and Balancing of Building HVAC Systems (ANSI Approved)
ASHRAE 41.3-1989 - Standard 41.3-1989 -- Standard Method for Pressure Measurement
This product referenced by:ANSI/ASHRAE 111-2008 - Standard 110-1995 -- Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 41.2-1987 (RA 92) - Standard 110-1995 -- Method of Testing Performance of Laboratory Fume Hoods

Browse Product Family:

ANSI/ASHRAE IC 110-1995-1
ASHRAE 110-1995

People Who Bought This Also Bought:
ANSI/AIHA Z9.5-2003- ANSI Standard for Laboratory VentilationASHRAE 62.1-2007- Standard 62.1-2007 -- Ventilation for Acceptable Indoor Air Quality (ANSI Approved)ANSI/ASHRAE 55-2004- Standard 55-2004 -- Thermal Environmental Conditions for Human Occupancy (ANSI Approved)ANSI/ASHRAE 180-2008- Standard 180-2008 -- Standard Practice for Inspection and Maintenance of Commercial Building HVAC Systems (ANSI/ASHRAE/ACCA Approved)ANSI/ASHRAE 111-2008- Testing, Adjusting, and Balancing of Building HVAC Systems (ANSI Approved)ANSI/ASME B16.22-2001 (R2010)- Wrought Copper and Copper Alloy Solder Joint Pressure FittingsNSF/ANSI 49-2009- NSF 49 Class II (Laminar Flow) Biosafety CabinetryANSI/ASME B18.2.1-1996 (R2005)- Square and Hex Bolts and Screws - Inch SeriesASHRAE 52.1-1992- Standard 52.1-1992 -- Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate MatterANSI/ASME B16.5-2003- Pipe Flanges and Flanged Fittings: NPS 1/2 through 24