BS EN 12952-5:2011

Cross References:
EN 287-1:2011
EN 473
EN 571-1:1997
EN 1092-1:2007
EN 1418:1997
EN 1759-1:2004
EN 10025-2
EN 10028-2
EN 10204:2004
EN 10216-2
EN 10253-2:2007
EN 10253-4:2008
EN 12952-1:2001
EN 12952-2:2011
EN 12952-3:2011
EN 12952-6:2011
EN 12952-7:2002
EN ISO 148-1:2010
ISO 148-1:2009
EN ISO 4759-1:2000
ISO 4759-1:2000
EN ISO 5817
ISO 5817:2003
ISO 5817:2003/Technical Corrigendum 1:2006
EN ISO 6520-1
ISO 6520-1:2007
EN ISO 6892-1:2009
ISO 6892-1:2009
EN ISO 14555:2006
ISO 14555:2006
EN ISO 15609
EN ISO 15613
ISO 15613:2004
EN ISO 15614-1:2004
ISO 15614-1:2004
EN ISO 17638:2009
ISO 17638:2003
EN ISO 17663:2009
ISO 17663:2009
EN ISO 23277:2009
ISO 23277:2006
EN ISO 23278:2009
ISO 23278:2006
CEN ISO/TR 15608
ISO/TR 15608:2005
EN 1011-1:2009
EN 1011-2
EN 1011-3
EN 1708-1
EN 1708-2
EN 12952-4
EN ISO 3834-2:2005
ISO 3834-2:2005
EN ISO 3834-3
ISO 3834-3:2005
EN ISO 4063
ISO 4063:2009
EN ISO 8501-1
ISO 8501-1:2007
EN ISO 9000
ISO 9000:2005
EN ISO 9001:2008
ISO 9001:2008
EN ISO 9692-1
ISO 9692-1:2003
EN ISO 9692-2
ISO 9692-2:1998
EN ISO 13916:1996
ISO 13916:1996
EN ISO 14731
ISO 14731:2006
CEN ISO/TR 20172
ISO/TR 20172:2009
97/23/EEC


All current amendments available at time of purchase are included with the purchase of this document.



Keywords: Water-tube boilers; Steam boilers; Boilers; Auxiliary; Heating equipment; Heaters; Fired pressure vessels; Quality assurance ; Specification (approval); Welded joints; Welding

Product Code(s): 30184310,30184310

This product references:BS EN 12952-3:2011 - Water-tube boilers and auxiliary installations. Design and calculation for pressure parts of the boiler
ISO 9001:2008 - Quality management systems -- Requirements
ISO 6892-1:2009 - Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 17663:2009 - Welding - Quality requirements for heat treatment in connection with welding and allied processes
BS EN ISO 148-1:2010 - Metallic materials. Charpy pendulum impact test. Test method
ISO 4063:2009 - Welding and allied processes - Nomenclature of processes and reference numbers
BS EN ISO 15614-1:2004 - Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 15614-1:2004 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
BS EN ISO 17638:2009 - Non-destructive testing of welds. Magnetic particle testing
BS EN 10253-2:2007 - Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements
ISO 23277:2006 - Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
ISO 148-1:2009 - Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 23278:2006 - Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
ISO 9692-2:1998 - Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels
BS EN ISO 9001:2008 - Quality management systems. Requirements
BS EN 10253-4:2008 - Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
ISO 6520-1:2007 - Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding
BS EN ISO 6892-1:2009 - Metallic materials. Tensile testing. Method of test at ambient temperature
BS EN 12952-6:2011 - Water-tube boilers and auxiliary installations. Inspection during construction; documentation and marking of pressure parts of the boiler
BS EN 12952-7:2002 - Water-tube boilers and auxiliary installations. Requirements for equipment for the boiler
ISO 17638:2003 - Non-destructive testing of welds - Magnetic particle testing
BS EN ISO 17663:2009 - Welding. Quality requirements for heat treatment in connection with welding and allied processes
ISO 5817:2003 - Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
BS EN ISO 23277:2009 - Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels
BS EN ISO 23278:2009 - Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
BS EN 1011-1:2009 - Welding. Recommendations for welding of metallic materials. General guidance for arc welding
BS EN ISO 3834-2:2005 - Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements
ISO 3834-2:2005 - Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
ISO 3834-3:2005 - Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
ISO 8501-1:2007 - Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 9000:2005 - Quality management systems - Fundamentals and vocabulary
ISO 9692-1:2003 - Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
ISO 13916:1996 - Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 14731:2006 - Welding coordination - Tasks and responsibilities
BS EN 287-1:2011 - Qualification test of welders. Fusion welding. Steels
BS EN 571-1:1997 - Non-destructive testing. Penetrant testing. General principles
BS EN 1092-1:2007 - Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges
BS EN 1759-1:2004 - Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated. Steel flanges, NPS 1/2 to 24
BS EN 10204:2004 - Metallic materials. Types of inspection documents
BS EN 12952-1:2001 - Water-tube boilers and auxiliary installations. General
BS EN 12952-2:2011 - Water-tube boilers and auxiliary installations. Materials for pressure parts of boilers and accessories
ISO 4759-1:2000 - Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
BS EN ISO 14555:2006 - Welding. Arc stud welding of metallic materials
ISO 14555:2006 - Welding - Arc stud welding of metallic materials
ISO 15613:2004 - Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
This product referenced by:BS EN 12952-2:2011 - Water-tube boilers and auxiliary installations. Workmanship and construction of pressure parts of the boiler
BS EN 12952-3:2011 - Water-tube boilers and auxiliary installations. Workmanship and construction of pressure parts of the boiler
BS EN 12952-6:2011 - Water-tube boilers and auxiliary installations. Workmanship and construction of pressure parts of the boiler
BS EN 12952-7:2012 - Water-tube boilers and auxiliary installations. Workmanship and construction of pressure parts of the boiler
This product replaces:BS EN 12952-5:2001 - Water-tube boilers and auxiliary installations. Workmanship and construction of pressure parts of the boiler