BS EN 50156-1:2004

Cross References:
EN 267:1999
EN 298:1993
EN 50265-1:1998
EN 55011:1998
EN 55011:1998/A1:1999
EN 55011:1998/A2:2002
CISPR 11:1997
CISPR 11:1997/A1:1999
CISPR 11:1997/A2:2002
EN 55022:1998
EN 55022:1998/A1:2000
EN 55022:1998/A2:2003
CISPR 22:1997
CISPR 22:1997/A1:2000
CISPR 22:1997/A2:2002
EN 60034-1:1998
EN 60034-1:1998/A1:1998
EN 60034-1:1998/A2:1999
IEC 60034-1:1996/A1:1997
IEC 60034-1:1996/A2:1999
EN 60204-1:1997
IEC 60204-1:1997
EN 60309-1:1999
IEC 60309-1:1999
EN 60445:2000
IEC 60445:1999
EN 60519-1:1993
IEC 60519-1:1984
EN 60529:1991
IEC 60529:1989
EN 60617
IEC 60617
EN 60654-3:1997
IEC 60654-3:1983
EN 60664-1:2003
IEC 60664-1:1992
IEC 60664-1:1992/A1:2000
IEC 60664-1:1992/A2:2002
EN 60947-2:1989
EN 60947-2:1989/A1:1997
EN 60947-2:1989/A2:2001
IEC 60947-2:1995
EN 60947-3:1990
EN 60947-3:1990/A1:2001
IEC 60947-3:1999
EN 60947-4-1:2001
IEC 60947-4-1:2000
EN 60947-5
IEC 60947-5
EN 61000-4
IEC 61000-4
EN 61082
IEC 61082
EN 61131-3:2003
IEC 61131-3:2003
EN 61140:2002
IEC 61140:2001
EN 61346-1:1996
IEC 61346-1:1996
EN 61508
IEC 61508-1
EN 61558-1:1997
IEC 61558-1:1997
EN 61810-1:1998
IEC 61810-1:1998
CENELEC HD 384.4
IEC 60364-4
CENELEC HD 384.4. 41 S2:1996
IEC 60364-4-41:1992
CENELEC HD 384.5.54 S1:1988
IEC 60364-5-54:1980
CENELEC HD 472 S1:1989
CENELEC HD 472 S1:1989/A1:1995
IEC 60038:1983
IEC 60050-191:1990
IEC 60050-826:1982
IEC 60092-101:1994
IEC 60092-101:1994/A1:1995
IEC 60417
IEC 60536-2:1992
ISO 3864:1984
ISO 7000:1989
ISO 9000:2000
EN 50075:1990
EN 60870-5-1:1993
IEC 60870-5-1:1990
EN 60947-4-1:1999
IEC 60947-1:1999
EN 61131-1:1994
IEC 61131-1:1992
EN 61131-2:1994
IEC 61131-2:1992
EN ISO 9001:2000
ISO 9001:2000
EN ISO 9004:2000
ISO 9004:2000
IEC 60038:2002
IEC 60038:1983
IEC 60038:1983/A1:1994
IEC 60038:1983/A2:1997
IEC 60326-3:1991
IEC 60332-2:1989
IEC 60364-5-54:2002




Keywords: Electrical equipment; Furnaces; Heating equipment; Installation ; Hot-water central heating; Steam boilers; Warm-air heating; Gas-powered devices; Heat exchangers; Combustion chambers; Turbines ; Stationary; Documents; Protected electrical equipment; Electrical protection equipment; Safety devices; Switches; Auxiliary; Circuits; Earthing; Electrical safety; Error detection; Computer software; Computer hardware; Maintenance; Electric cables; Electric conductors; Electrical connections; Flow charts

Product Code(s): 30126029,30126029

This product references:BS EN 55011:1998 - Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment
BS EN 55022:1998 - Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 60034-1:1998 - Rotating electrical machines. Rating and performance
IEC 61508-1 Ed. 1.0 b:1998 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see www.iec.ch/61508)
BS EN 60204-1:1997 - Safety of Machinery - Electrical Equipment of Machines - Part 1: Specifications for General Requirements
BS EN 61140:2002 - Protection against electric shock. Common aspects for installation and equipment
BS EN 61131-1:1994 - Programmable Controllers - Part 1: General Information
BS EN 61131-3:2003 - Programmable controllers. Programming languages
BS EN 60664-1:2003 - Insulation coordination for equipment within low-voltage systems. Principles, requirements and tests
BS EN 267:1999 - Forced draught oil burners. Definitions, requirements, testing, marking
BS EN ISO 9001:2000 - Quality management systems. Requirements
BS EN 60445:2000 - Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system
BS EN ISO 9004:2000 - Quality management systems. Guidelines for performance improvements
BS EN 61346-1:1996 - Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations. Basic rules
BS EN 60947-4-1:2001 - Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters
BS EN 60309-1:1999 - Plugs, socket-outlets and couplers for industrial purposes. General requirements
BS EN 60519-1:1993 - Safety in electroheat installations. General requirements
ISO 9001:2000 - Quality management systems -- Requirements
ISO 7000:1989 - Graphical symbols for use on equipment; index and synopsis
ISO 9004:2000 - Quality management systems -- Guidelines for performance improvements
This product referenced by:BS EN 12953-9:2007 - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS EN 12952-11:2007 - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS 08/30190311 DC - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS EN 676:2003 A2:2008 - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS 10/30202723 DC - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS EN 12953-6:2011 - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS 12/30258099 DC - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS EN 267:2009 A1:2011 - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS 12/30257298 DC - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS EN 12952-7:2012 - Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation