ANSI/API Std 560

This International Standard specifies requirements and gives recommendations for the design, materials,fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters, fans and burners for general refinery service.

This International Standard is not intended to apply to the design of steam reformers or pyrolysis furnaces.

This edition of API Std 560 is the identical national adoption of ISO 13705, Petroleum, petrochemical and natural gas industries- Fired heaters for general refinery service.



Product Code(s): C56004,C56004

This product references:ISO 1461:1999 - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
ISO 1940-1:2003 - Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
ISO 1940-1/Cor1:2005 - Mechanical vibration - Balance quality requirements of rigid rotors - Part 1: Determination of permissible residual unbalance - Corrigendum
ISO 8501-1:2007 - Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 10684:2004 - Fasteners - Hot dip galvanized coatings
ISO 10684/Cor1:2008 - Corrigendum
ISO 13704:2007 - Petroleum, petrochemical and natural gas industries - Calculation of heater-tube thickness in petroleum refineries
ISO 13704/Cor1:2008 - Corrigendum
ISO 15649:2001 - Petroleum and natural gas industries -- Piping
BS EN 10025-6:2004 - Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
ANSI/ABMA 9:1990 (R2008) - Load Ratings and Fatigue Life for Ball Bearings
ANSI/AMCA 210-07 - Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
AMCA 801-01 (R2008) - Industrial Process/Power Generation Fans: Specification Guidelines
API Std 673 (R2010) - Centrifugal Fans for Petroleum, Chemical and Gas Industry Services, Second Edition
IEC 60079-0 Ed. 5.0 b:2007 - Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-1 Ed. 6.0 b:2007 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures d
IEC 60079-2 Ed. 5.0 b:2007 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosures p
IEC 60079-4 Amd.1 Ed. 2.0 b:1995 - Amendment 1 - Electrical apparatus for explosive gas atmospheres. Part 4: Method of test for ignition temperature
IEC 60079-5 Ed. 3.0 b:2007 - Explosive atmospheres - Part 5: Equipment protection by powder filling q
IEC 60079-6 Ed. 3.0 b:2007 - Explosive atmospheres - Part 6: Equipment protection by oil immersion o
IEC 60079-7 Ed. 4.0 b:2006 - Explosive atmospheres - Part 7: Equipment protection by increased safety e
IEC 60079-10 Ed. 4.0 b:2002 - Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
IEC 60079-11 Ed. 5.0 b CORR1:2006 - Corrigendum 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety i
IEC 60079-14 Ed. 4.0 b:2007 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection
IEC 60079-17 Ed. 4.0 b:2007 - Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
IEC 60079-18 Ed. 2.0 b:2004 - Electrical apparatus for explosive gas atmospheres - Part 18: Construction, test and marking of type of protection encapsulation m electrical apparatus
IEC 60079-19 Ed. 2.0 b:2006 - Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
IEC 60079-25 Ed. 1.0 b:2003 - Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically safe systems
IEC 60079-26 Ed. 2.0 b:2006 - Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga
IEC 60079-27 Ed. 2.0 b:2008 - Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
IEC 60079-28 Ed. 1.0 b:2006 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
IEC 60079-29-2 Ed. 1.0 b:2007 - Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
IEC 60079-30-1 Ed. 1.0 b:2007 - Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
IEC 60079-30-2 Ed. 1.0 b:2007 - Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
ASME BPVC-VIII-1-2007 - 2007 ASME Boiler and Pressure Vessel Code, Section VIII, Division 1: Rules for Construction of Pressure Vessels, Includes Addenda (2008 and 2009)
ASME BPVC-VIII-2-2007 - 2007 ASME Boiler and Pressure Vessel Code, Section VIII, Division 2: Alternative Rules, Includes Addenda (2008 and 2009)
ASME BPVC-VIII-3-2007 - 2007 ASME Boiler and Pressure Vessel Code, Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels, Includes Addenda (2008 and 2009)
ANSI/ASME B17.1-1967 (R2008) - Keys and Keyseats
ASTM A36/A36M-08 - Standard Specification for Carbon Structural Steel
ASTM A53/A53M-07 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A105/A105M-05 - Standard Specification for Carbon Steel Forgings for Piping Applications
ASTM A106/A106M-08 - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM A123/A123M-08 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
ASTM A143/A143M-07 - Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
ASTM A153/A153M-05 - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM A181/A181M-06 - Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
ASTM A182/A182M-08a - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A192/A192M-02(2007) - Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A193/A193M-08b - Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A194/A194M-08b - Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A209/A209M-03(2007) - Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
ASTM A210/A210M-02(2007) - Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
ASTM A213/A213M-08 - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A216/A216M-07 - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
ASTM A217/A217M-07 - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
ASTM A234/A234M-07 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A240/A240M-08 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A242/A242M-04e1 - Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A283/A283M-03(2007) - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM A297/A297M-08 - Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
ASTM A307-07b - Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A312/A312M-08 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A320/A320M-08 - Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
ASTM A325-07a - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
ASTM A335/A335M-06 - Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
ASTM A351/A351M-06 - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
ASTM A376/A376M-06 - Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
ASTM A384/A384M-07 - Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
ASTM A385-08 - Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A387/A387M-06a - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
ASTM A403/A403M-07a - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASTM A447/A447M-93(2007) - Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
ASTM A560/A560M-05 - Standard Specification for Castings, Chromium-Nickel Alloy
ASTM A572/A572M-07 - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A608/A608M-06 - Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
ASTM B366-04be1 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
ASTM B407-08 - Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASTM B564-06a - Standard Specification for Nickel Alloy Forgings
ASTM B633-07 - Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM C27-98(2002) - Standard Classification of Fireclay and High-Alumina Refractory Brick
ASTM C155-97(2007) - Standard Classification of Insulating Firebrick
ASTM C332-07 - Standard Specification for Lightweight Aggregates for Insulating Concrete
ASTM C401-91(2005) - Standard Classification of Alumina and Alumina-Silicate Castable Refractories
ASTM C612-04e1 - Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ANSI/AWS D1.1/D1.1M:2008 - Structural Welding Code - Steel, Second Printing, Includes Errata (2009)
ANSI/AWS D14.6/D14.6M:2005 - Specification for Welding of Rotating Elements of Equipment
MSS SP-53-1999 (R2007) - Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components-Magnetic Particle Exam Method
MSS SP-55-2006 - Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components - Visual Method for Evaluation of Surface Irregularities
MSS SP-93-1999 (R2004) - Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other Piping Components - Liquid Penetrant Examination Method
NFPA (Fire) 70 - National Electrical Code, 2008 Edition
NACE No. 3 - SSPC SP6 - Joint Surface Preparation Standard: Commercial Blast Cleaning
This product referenced by:ANSI/API RP 556 - Fired Heaters for General Refinery Service, Fourth Edition
This product replaces:ANSI/API 560 - Fired Heaters for General Refinery Services

Browse Product Family:

ANSI/API Std 560
ANSI/API 560
ANSI/API Std 560

People Who Bought This Also Bought:
API RP 535- Burners for Fired Heaters in General Refinery Services, Second EditionANSI/API Std 530- Calculation of Heater-tube Thickness in Petroleum Refineries, Sixth Edition (ISO 13704:2007, Identical), Includes Errata (2009)ANSI/API Std 560 Datasheets- Datasheets for Fired Heaters for General Refinery ServicesANSI/API RP 556- Instrumentation and Control Systems for Fired Heaters and Steam GeneratorsAPI Std 520- Sizing, Selection, and Installation of Pressure-relieving Devices in Refineries, Part I - Sizing and Selection, Eighth EditionANSI/API Std 618- Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services, Fifth Edition, Includes Errata 1 and 2 (2009 and 2010)ANSI/API RP 536- Post-Combustion NOx Control for Fired Equipment in General Refinery Services, Second EditionANSI/API Std 530- Calculation of Heater Tube Thickness in Petroleum Refineries ISO 13704:2001 (E), Petroleum and natural gas industries-Calculation of heater tube thickness in petroleum refineries, Fifth EditionAPI Std 677 (R2010)- General-Purpose Gear Units for Petroleum, Chemical and Gas Industry Services, Third EditionANSI/API Std 660- Shell-and-tube Heat Exchangers, Eighth Edition
View Contents (PDF)