ANSI/ASA S2.72-2002/Part 1 / ISO 2631-1:1997 (R2012)

This part of ANSI S2.72 / ISO 2631 defines methods for the measurement of periodic, random andtransient whole-body vibration. It indicates the principal factors that combine to determine the degreeto which a vibration exposure will be acceptable. Informative annexes indicate current opinion andprovide guidance on the possible effects of vibration on health, comfort and perception and motionsickness. The frequency range considered is

- 0.5 Hz to 80 Hz for health, comfort and perception and- 0.1 Hz to 0.5 Hz for motion sickness.

Although the potential effects on human performance are not covered, most of the guidance on wholebodyvibration measurement also applies to this area. This part of ANSI S2.72 / ISO 2631 also definesthe principles of preferred methods of mounting transducers for determining human exposure. It doesnot apply to the evaluation of extreme-magnitude single shocks such as occur in vehicle accidents.This part of ANSI S2.72 / ISO 2631 is applicable to motions transmitted to the human body as a wholethrough the supporting surfaces: the feet of a standing person, the buttocks, back and feet of a seatedperson or the supporting area of a recumbent person. This type of vibration is found in vehicles, inmachinery, in buildings and in the vicinity of working machinery.

This product replaces:ANSI/ASA S3.18/Part 1-2002 / ISO 2631-1:1997 - Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 1: General Requirements (S3.18-2002/ISO 2631-1:1997)

Browse Product Family:

ANSI/ASA S2.72/Part 1 Amd. 1-2010/ISO 2631-1 Amd. 1:2010 (R2012)
ANSI/ASA S2.72-2002/Part 1 / ISO 2631-1:1997 (R2012)
ANSI/ASA S3.18/Part 1-2002 / ISO 2631-1:1997
ANSI/ASA S3.18-1979(R1999)

People Who Bought This Also Bought:
ANSI/ASA S2.71-1983 (R2012)- American National Standard Guide to the Evaluation of Human Exposure to Vibration in Buildings (Formerly S3.29-1983)ANSI/B11 B15.1-2000 (R2008)- Safety Standard for Mechanical Power Transmission ApparatusISO 5349-2:2001- Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplaceASTM F519-08- Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service EnvironmentsISO 5349-1:2001- Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration -- Part 1: General requirementsIEC 60349-2 Ed. 2.0 b:2002- Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating current motorsASTM C177-10- Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate ApparatusASTM D618-08- Standard Practice for Conditioning Plastics for TestingANSI/B11/ISO 12100-2:2007- Safety of Machinery - Basic Concepts, General Principles for Design Part 2: Technical Principles (Identical Adoption of ISO 12100-2:2003)ASTM D2651-01(2008)- Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding