ANSI/ISA RP12.13.02-2003

ANSI/ISA-RP12.13.02 (IEC 61779-6 Mod) gives guidance on the selection, installation, use, and maintenance of electrically operated group II apparatus for the detection and measurement of flammable gases complying with the requirements of ANSI/ISA-12.13.01 (IEC 61779-1 through 5 Mod).

It is a compilation of practical knowledge to assist the user, and applies to apparatus, instruments and systems that indicate the presence of a flammable or potentially explosive mixture of gas or vapour with air by using an electrical signal from a gas sensor to produce a meter reading, to activate a visual or audible pre-set alarm or other device, or any combinationof these.



Keywords: alarms, combustible gas detection instruments - maintenance of, preparation of, and storage of; gas detectors; explosive service; gases; hazardous locations; safety; sample-draw instruments

This product references:NFPA (Fire) 70 - 2002 National Electrical Code
ANSI/ISA 12.13.01-2003 (IEC 61779-1 through 5 Mod) - Performance Requirements for Combustible Gas Detectors
This product referenced by:NFPA (Fire) 70 - Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments
API RP 500 (R2002) - Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments
API RP 500 - Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments
This product replaces:ISA RP 12.13, Part II-1987 - Installation, Operation, Maintenance of Combustible Gas Detection Instruments

Browse Product Family:

ANSI/ISA RP12.13.02-2003
ISA RP 12.13, Part II-1987

People Who Bought This Also Bought:
ANSI/ISA 12.13.01-2003 (IEC 61779-1 through 5 Mod)- Performance Requirements for Combustible Gas DetectorsAPI RP 2001- Fire Protection in Refineries, Eighth EditionISA RP92.0.02, Part II-1998- Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments: Hydrogen SulfideISA RP16.4-1960- Nomenclature Terminology for Extension Type Variable Area Meters, Rotameters : ISA Standard RP16.4ANSI/ISA TR12.21.01-2004- Use of Fiber Optic Systems in Class I Hazardous (Classified) LocationsISA 92.0.01, Part I-1998- Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen SulfideANSI/ISA TR12.24.01-1998- Recommended Practice for Classifications of Locations for Electrical Installations Classified as Class I Zone 0, Zone 1, or Zone 2ANSI/ISA 12.27.01-2003- Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process FluidsISA RP12.4-1996- Pressurized Enclosures : RP12.4ANSI/ISA 12.04.01-2004- Electrical Apparatus for Explosive Gas Atmospheres - Part 2 Pressurized Enclosures 'p' (IEC 60079-2 Mod)