ANSI/AWS A5.3/A5.3M:1999 (R2007)

This specification prescribes requirements for the classification of covered (flux coated) E1100, E3003, and E4033 aluminum-alloy electrodes for for shielded metal arc welding. Tests conducted for classiciation are chemical analysis of the core wire as well as tensile and bend tests from groove weld test assemblies fabricated with each of two sizes of electrode for each classification. Standard electrode sizes, electrode identification, and chemical composition limits are specified. This specification makes use of both US Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.



Keywords: covered aluminum electrodes; aluminum welding electrodes; shielded metal arc welding; filler metal specification

This product referenced by:ANSI/AWS A5.01M/A5.01:2008 - Specification for Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/ASME B31.9-2008 - Specification for Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/AWS A2.4:2007 - Specification for Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding

People Who Bought This Also Bought:
ANSI/AWS D1.1/D1.1M:2010- Structural Welding Code - SteelANSI/AWS A3.0M/A3.0:2010- Standard Welding Terms and Definitions - Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal SprayingAWS A2.1-WC- Welding Symbols Wall ChartANSI/AWS A5.12M/A5.12:2009- Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting (ISO 6848:2004 MOD)ANSI/AWS D1.3/D1.3M:2008- Structural Welding Code - Sheet Steel, Fifth Edition, with ErrataANSI/AWS A5.01M/A5.01:2008- Procurement Guidelines for Consumables - Welding and Allied Processes - Flux and Gas Shielded Electrical Welding Processes (ISO 14344:2002 MOD)ANSI/AWS D1.6/D1.6M:2007- Structural Welding Code - Stainless SteelANSI/AWS D1.2/D1.2M:2008- Structural Welding Code - AluminumANSI/AWS D18.1/D18.1M:2009- Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications