ANSI/ISA 12.16.01-2002
This part of IEC 60079ANSI/ISA-12.16.01-2002 (IEC 60079-7 Mod) specifies the requirements for thedesign, construction, testing and marking of electrical apparatus with type of protection increased safetye intended for use in Class I, Zone 1, Groups IIA, IIB, and IIC hazardous (classified) locationsexplosivegas atmospheres. This standard applies to electrical apparatus with a rated value of supply voltage notexceeding 11 kV r.m.s. a.c. or d.c. Additional measures are applied to ensure that the apparatus does notproduce arcs, sparks, or excessive temperatures in normal operation or under specified abnormalconditions.
These specific requirements are additional to the general requirements in ANSI/ISA?12.00.01-2002 (IEC60079-0 Mod)IEC 60079-0 that apply to type of protection increased safety e unless specificallyexcluded.
- This product replaced by:ANSI/ISA 60079-7 (12.16.01)-2008 - Explosive Atmospheres ? Part 7: Equipment Protection by Increased Safety E
This product referenced by:NFPA (Fire) 70 - Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety e (IEC 60079-7 Mod)
This product replaces:ANSI/ISA 12.16.01-1998 - Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety 'e'
ANSI/ISA 60079-7 (12.16.01)-2008
ANSI/ISA 12.16.01-2002
ANSI/ISA 12.16.01-1998
People Who Bought This Also Bought:
ANSI/ISA 12.00.01-2005- Electrical Apparatus for Use in Class I, Zones 0, 1 2 Hazardous (Classified) Locations: General Requirements (IEC 60079-0 Mod)BS EN 60079-0:2006- Electrical apparatus for explosive gas atmospheres. General requirementsCISPR 22 Ed. 6.0 b:2008- Information technology equipment - Radio disturbance characteristics - Limits and methods of measurementANSI/ISA 12.00.01-2002- Electrical Apparatus for Use in Class I, Zones 0, 1 2 Hazardous (Classified) Locations: General Requirements (IEC 60079-0 Mod)BS EN 60079-11:2007- Explosive atmospheres. Equipment protection by intrinsic safety iCAN/CSA C22.2 NO. 157-92 (R2012)- Intrinsically Safe and Non-Incendive Equipment for Use in Hazardous LocationsANSI/ISA 12.25.01-1998- Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Powder Filling 'q' (IEC 60079-5 Mod)BS EN 61000-4-4:2004- Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity testCISPR 16-2-1 Ed. 1.1 b:2005- Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements CONSOLIDATED EDITIONBS EN 61000-4-6:2007- Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
