MSS SP-60-2012
MSS SP-60-2012 Connecting Flange Joints Between Tapping Sleeves and Tapping Valves
standard by Manufacturers Standardization Society, 05/01/2012
Full Description
PURPOSEThe purpose of this Standard Practice is to prevent interface and interference problems between tapping sleeves and tapping valves through the use of a positioning recess and mating raised face of the connecting flanges between tapping sleeves and tapping valves. The recess and raised face serve to ensure proper alignment of the tapping valve onto the tapping sleeve but do not affect the strength or the tightness of the joint.
SCOPE
1.1 This Standard Practice establishes flange and gasket dimensions which define the interface between tapping sleeves and tapping valves.
1.2 This Standard Practice establishes dimensions for these special connecting flanges and gaskets of nominal sizes from NPS 2 through NPS 60 (DN 50 through DN 1500) for water and sewerage systems.
1.3 This Standard Practice establishes pressure-temperature ratings for the connecting flanges.
Cart
(empty)
New products
No new products at this time
