ANSI/ASSE A1264.2-2006

This standard sets forth provisions for protecting persons where there is potential for slipping and falling as a result of surface characteristics or conditions. There are three basic areas addressed in the standard: 1) provisions for reducing hazards; 2) test procedures and equipment; and 3) slip resistance guideline. The intent of this standard is to help in the reduction of falls due to conditions, which in some fashion are manageable. The standard in its present form provides for the minimum performance requirements necessary for increased safety on walking/working surfaces in the workplace.

This product replaced by:ANSI/ASSE A1264.2-2012 - Standard for the Provision of Slip Resistance on Walking/Working Surfaces
This product replaces:ANSI/ASSE A1264.2-2001 - Standard for the Provision of Slip Resistance on Walking/Working Surfaces

Browse Product Family:

ANSI/ASSE A1264.2-2012
ANSI/ASSE A1264.2-2006
ANSI/ASSE A1264.2-2001

People Who Bought This Also Bought:
ANSI/ASSE Z244.1-2003 (R2008)- Safety Requirements for the Lock Out/Tag Out of Energy SourcesANSI/ASSE A1264.1-2007- Safety Requirements for Workplace Walking/Working Surfaces and Their Access; Workplace Floor, Wall and Roof Openings; Stairs and Guardrails SystemsANSI/ASSE Z117.1-2003- Safety Requirements for Confined SpacesANSI/ASSE A10.16-1995(R2001)- Safety Requirements for Tunnels, Shafts, and CaissonsANSI/ASSE A10.3-2006- Safety Requirements for Powder-Activated Fastening SystemsANSI/ASSE A10.28-1998 (2004)- Safety Requirements for Work Platforms Suspended from Cranes or DerricksASHRAE - Standard 90.1-2007 User's ManualANSI/ASHRAE 41.1-1986 (RA 2006)- Standard 41.1-1986 (RA 2006) -- Standard Method for Temperature Measurement (ANSI Approved)ANSI/ASSE A10.46-2007- Hearing Loss Prevention for Construction and Demolition WorkersANSI/ASME B30.10-2009- Hooks